Stepper motor Specification: * Motor Type: Bipolar Stepper * Manufacturer Part Number: 17HS16-2004S * Step Angle: 1.8 deg. * Holding Torque: 0.45Nm(64 oz.in) * Rated Current/phase: 2.0A * Frame Size: 41 x 41mm * Body Length:38mm * Shaft Length: 22mm * Weight: 380g Mounting Bracket Kit Specification: * NEMA 17 Mounting Bracket - 90 degrees * M3 Screws Included (4) * Mounting Holes: 31mm center-to-center * Max Collar Diameter: 22mm * Powder-coated steel * Nema17 Standard Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor. Package Including: 1 X Nema 17 Stepper Motor 1 X Nema 17 Stepper Motor Mounting Bracket 1 x 1m Cable & Connector 4 X 3*6mm M3 Screws
Nema17 Stepper Motor 64 oz.in (45 Ncm) 38mm Body 1.8 degree with 1M 4-pin Cable and Mounting Bracket Kit DIY 3D Printer CNC Robot.
It's ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications.
This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 45Ncm(63.7oz.in).
The motor is supplied with a 1 metre long power cable with a 4-pin Harwin female connector already fitted - ready to plug and print!
Connection: Black(A+), Green(A-), Red(B+), Blue(B-).